COMPACFOAM - the perfect solution for metal construction
Thermally insulating, pressure-resistant, stable, screwable & moisture-resistant
Safe and economical installation with high load-bearing capacity and thermal separation.
Discover now
Efficient solutions for metal construction
In metal construction, two critical requirements usually come together: high loads and the need for thermal separation.
COMPACFOAM is the perfect solution for this, as it can withstand extremely high pressure loads and at the same time has excellent insulating properties.
This makes the material ideal for substructures, insulation or reinforcement and can be used, for example, for thermal separations in steel construction, such as under brackets or for supporting concrete components. Due to its high screw pull-out strength and compressive stability COMPACFOAM especially for load-bearing and structural elements.
Another application in the field of metal construction is panel edge reinforcement. Also in window construction COMPACFOAM particularly suitable for substructures, wall mounting and much more.
Applications in metal construction
Steel substructures (Thermostopp)
Bearing from COMPACFOAM can be used in steel construction for thermal separation between permanently highly stressed components, e.g. balcony railings, roofing, handrails or ladders.
Heat loss due to local thermal bridges can be significantly reduced by CF separation layers of 10-200 mm under brackets and mounting points. The bearings can be supplied pre-assembled or cut from panels on site. Drill holes and slotted holes with milling are also possible without any problems.
Panel edge reinforcement
The dimensionally stable and pressure-resistant panel edge reinforcement from COMPACFOAM is the ideal insulation material for high stresses in the edge area of sandwich elements.
Sandwich panels in highly thermally insulated window and façade constructions, as well as frame constructions with glazing beads, require appropriate thermal insulation values and high compressive strength at the insulation level.
Modern solutions for window construction
Thermal bridge-free, load-bearing and lightweight - COMPACFOAM combines high stability with excellent insulation performance. Ideal for pre-wall installation, window sill connections and more. Find out more now!
to window constructionSteel substructures (Thermostopp)
Bearing from COMPACFOAM can be used in steel construction for thermal separation between permanently highly stressed components, e.g. balcony railings, roofing, handrails or ladders.
Heat loss due to local thermal bridges can be significantly reduced by CF separation layers of 10-200 mm under brackets and mounting points. The bearings can be supplied pre-assembled or cut from panels on site. Drill holes and slotted holes with milling are also possible without any problems.
Panel edge reinforcement
The dimensionally stable and pressure-resistant panel edge reinforcement from COMPACFOAM is the ideal insulation material for high stresses in the edge area of sandwich elements.
Sandwich panels in highly thermally insulated window and façade constructions, as well as frame constructions with glazing beads, require appropriate thermal insulation values and high compressive strength at the insulation level.
Modern solutions for window construction
Thermal bridge-free, load-bearing and lightweight - COMPACFOAM combines high stability with excellent insulation performance. Ideal for pre-wall installation, window sill connections and more. Find out more now!
to window construction
Highly resilient
Climate stable
Recyclable
Excellent thermal insulation
Diversity
Machinable
Delivery forms
Perfect for increasing your flexibility.
Perfect for thermal separations under consoles.
(CNC MILLED) blanks with or without hole pattern
Perfect for installation in the insulation level.
Mounting bars or cubes
Perfect for spacers for your panels.
Rods with small cross-section
Screws, adhesive, brackets for mounting COMPACFOAM Elements
Our partners
References
Czech Republic
Thermal separation
FAQ
The choice of the right material class depends primarily on the required screw pull-out strength and compressive strength. Larger screws generally allow the use of a lighter material class. Typical material classes are
Window installation: CFeco and CF125
Sandwich cores for vehicle and furniture construction: CF200
Thermal break for steel structures: CF200, CF300, CF400
We are happy to support you in dimensioning and selecting the right material class to ensure that the solution is optimally tailored to your requirements. Do not hesitate to contact us if you have any questions or uncertainties!
Yes, COMPACFOAM is available in individual dimensions. The only limitation is usually the practical transport dimensions. Profiling and milling according to customer specifications are also possible.
Standard panels are available in all required thicknesses and strength classes. Cutting to size is easy with normal woodworking machines. Please use the saw blade recommended by us with a large tooth spacing. No substances harmful to health or the environment are produced during cutting.
The minimum dimensions are 6 mm thickness, 10 mm widthand the maximum dimensions are 500 mm thick, 1300 mm wide and 6000 mm long. Standard panels are also available for self-cutting.
All screws with a wood thread are suitable for installation. If there is sufficient space, a window frame screw with a diameter of 7.5 mm is recommended. Wood screws with a diameter of 4 mm are ideal for smaller components. Pre-drilling is not necessary and screws can also be used close to the edge without any problems.
COMPACFOAM has an unlimited shelf life under normal conditions. Moisture, water and frost do not affect the technical properties. UV radiation only has a minor superficial effect, meaning that even prolonged outdoor storage during the construction phase is unproblematic.
We are here for you!
Benefit from the advantages of COMPACFOAM. Let our experts advise you and find the perfect solution for your requirements.
Request now