{"id":818,"date":"2025-03-26T10:33:05","date_gmt":"2025-03-26T09:33:05","guid":{"rendered":"https:\/\/compacfoam.com\/en\/?page_id=818"},"modified":"2026-01-20T07:50:29","modified_gmt":"2026-01-20T06:50:29","slug":"metal-construction","status":"publish","type":"page","link":"https:\/\/compacfoam.com\/en\/area-of-application\/metal-construction\/","title":{"rendered":"COMPACFOAM in metal construction – precise & stable"},"content":{"rendered":"\n
\n
\n

COMPACFOAM<\/mark> – the perfect solution for metal construction<\/p>\n\n\n\n

Thermally insulating, pressure-resistant, stable, screwable & moisture-resistant<\/h1>\n\n\n\n

Safe and economical installation with high load-bearing capacity and thermal separation.<\/p>\n\n\n\nDiscover now<\/span>\n<\/path>\n<\/svg><\/span><\/a>\n<\/div>\n<\/div>\n\n\n\n

\n
\n\n<\/div>\n\n\n\n
\n

Efficient solutions for metal construction<\/h2>\n\n\n\n

In metal construction, two critical requirements usually come together: high loads and the need for thermal separation.<\/p>\n\n\n\n

COMPACFOAM<\/mark> is the perfect solution for this, as it can withstand extremely high pressure loads and at the same time has excellent insulating properties.<\/p>\n\n\n\n

This makes the material ideal for substructures, insulation or reinforcement and can be used, for example, for thermal separations in steel construction, such as under brackets or for supporting concrete components. Due to its high screw pull-out strength and compressive stability COMPACFOAM<\/mark> especially for load-bearing and structural elements.<\/p>\n\n\n\n

Another application in the field of metal construction is panel edge reinforcement. Also in window construction COMPACFOAM<\/mark> particularly suitable for substructures, wall mounting and much more.<\/p>\n<\/div>\n<\/div>\n\n\n\n

\n

Applications in metal construction<\/h2>\n\n\n\n
\n
\n
\nSteel substructures<\/span>\n<\/div>\n\n\n\n
\nPanel edge reinforcement<\/span>\n<\/div>\n\n\n\n
\nWindow applications<\/span>\n<\/div>\n<\/div>\n\n\n\n
\n
\n
\n
\n\n<\/div>\n\n\n\n
\n

Steel substructures (Thermostopp)<\/h3>\n\n\n\n

Bearing from COMPACFOAM<\/mark> can be used in steel construction for thermal separation between permanently highly stressed components, e.g. balcony railings, roofing, handrails or ladders.<\/p>\n\n\n\n

Heat loss due to local thermal bridges can be significantly reduced by CF separation layers of 10-200 mm under brackets and mounting points. The bearings can be supplied pre-assembled or cut from panels on site. Drill holes and slotted holes with milling are also possible without any problems.<\/p>\n\n\n\n

\nThermal separation<\/span>\n<\/path>\n<\/svg><\/span><\/a>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n\n\n\n
\n
\n