CompacFoam

Menu

SUPPORT PACKER.

ECONOMICAL AND STURDY.

The CF support packer is a combination of strength with excellent thermal insulation and very low weight. The material provides excellent thermal per- formance adequate support for the threshold and also allows the packer to be easily and securely fixed to the building substrate and the threshold profiles.Thanks to the stable, waterproof constructi- on material, attachment from all sides are possible.

SPECIFICATIONS:

  • Supplied in standard lengths of 2350mm and in any length, to order, up to a maximum of 6000mm.
  • Can be supplied in any height, to order, up to a maximum of 400mm.
  • Can also be produced as a stacking packer variant which can be glued and screwed together on to achieve the required dimension.
  • Plates 2350x1160x40-150mm (L, W, thickness)

THE SURFACE CAN ALSO BE CAPPED WITH A WHITE OR GREY PVC-U EXTERNAL FACE.

 

STANDARD PRODUCTION DETAILS FOR Siegenia, Aluplast, Profine and Maco to name a few. Other systems available on request.

 

SEALING DETAIL:
The external face must be sealed with a suitable sealing system. See
our data sheet for approved liquid waterproofing suppliers and products. Torch-on or heat gun applied bitumen sealing membranes can be used in accordance with the directions and recommendations on the sealing detail application sheet

 

  • TESTED ACCORDING TO ETB
  • TIMBER FREE MATERIAL
  • WILL NOT ROT
  • RESISTANT TO MOISTURE AND THE EFFECTS OF FREEZE THAW
  • EXCELLENT INSULATION PROPERTIES
Inquire now

Technical data

CF eco

Thickness

40 mm

45 mm

50 mm

55 mm

60 mm

65 mm

70 mm

75 mm

80 mm

85 mm

90 mm

95 mm

100mm

U-Value (W/ m2K)

1,13

1,00

0,90

0,82

0,75

0,70

0,64

0,60

0,56

0,53

0,50

0,47

0,45

Screw pull out 

resistance

825 N

Packing shim in mm

max. glass panel load in kg

60×40

283,80

53×66

376,00

53×140

877,40

53×170

1065,40

53×210

1316,00

Fire class
DIN 4102-1 / EN 13501-1

B1/E

Technical drawings.

System drawings

Installation variant with highly insulating substructure insulation profiles suitable for all door thresholds and window frames.

  1. Window frame screw 7.5mm – Pre-drilling is not required in the substructure profile. Spacings and fixing lengths are determined by the structural performance requirements.
  2. Joints are bonded with MS polymer adhesive or adhesive tape
  3. CFeco provides excellent structural support
  4. Packing shims
  5. The gap between the packers must be filled with insulating foam or
    cementitious grout depending on the thermal detail of the installation
  6. The external face must be sealed in accordance with the data sheet
    using a liquid plastic or bitumen membrane, please refer to
    approved supplier list
  7. Mounting brackets fixed in accordance with structural requirements
  8. Window frame fixing screws 7.5mm flat head
  9. Sealing inside must be in accordance with the building design criteria
  10. PVC-U to the visible face (Option)

> Due to the high stability of CF substructure insulation profiles, the forces are securely transferred through the support material to the building substrate.

 

> Wind pressure, Wind suction, static and moving load forces are transferred through the support material to the substrate
and the fixing brackets.


> Pre-drilling is not required in the substructure profile

Test mark.